Singer 6699 User Manual

67
ROLLER FOOT
ǾǼǹǶǸǼǰǮȍǹǮǽǸǮ
<89$5/$.$<$.
When sewing leather, suede, plastic and velvet, fit the
roller foot to aid the smooth flow of fabric. However,
especially when sewing softer leather and suede, better
results may be achieved by using the normal zigzag foot.
ǿȝȜȚȜȧȪȬȞȜșȖȘȜȐȜȗșȎȝȘȖǰȩȚȜȔȓȠȓȟ
șȓȑȘȜȟȠȪȬȞȎȏȜȠȎȠȪȟȠȎȘȖȚȖȚȎȠȓȞȖȎșȎȚȖȘȎȘ
ȘȜȔȎȕȎȚȦȎȟȖțȠȓȠȖȘȎȖȏȎȞȣȎȠȝȜșȡȥȎȭȞȜȐțȩȗ
ȖȘȞȎȟȖȐȩȗ ȦȜȐ ǼȒțȎȘȜ ȝȞȖȦȖȠȪȓ ȚȭȑȘȜȗ ȘȜȔȖȖ
ȕȎȚȦȖșȡȥȦȖȓ ȞȓȕȡșȪȠȎȠȩȚȜȑȡȠȏȩȠȪȒȜȟȠȖȑțȡȠȩȟ
ȝȞȖȚȓțȓțȖȓȚȜȏȩȥțȜȗȝȞȖȔȖȚțȜȗșȎȝȘȖ
'HULVHWSODVWLNYHNDGLIHGLNHUNHQNXPDúÕQDNÕúÕQD\DUGÕPFÕ
ROPDVÕLoLQ\XYDUODND\D÷ÕNXOODQÕQ$QFDN|]HOOLNOH\XPXúDN
GHULYH\DVHWGLNHUNHQQRUPDO]LJ]DJGLNLúD\D÷ÕNXOODQÕODUDN
GDKDL\LVRQXoODUHOGHHGLOHELOLU
6. 6699/6680 ONLY ACCESSORIES
 ȀǼǹȊǸǼǽǾǶǻǮDzǹdzǴǻǼǿȀǶ
 6$'(&($.6(68$5/$5
INVISIBLE ZIPPER FOOT
ǹǮǽǸǮDzǹȍǽǼȀǮǷǻǼǷǺǼǹǻǶǶ
*,=/,)(508$5$<$ö,
The Invisible Zipper Foot provides a
concealed closing on a variety of garments
and accessories. It is commonly seen on the
side or back of skirts and dresses.
Machine Preparation
$WWDFK,QYLVLEOH=LSSHU)RRW
6HWPDFKLQHWR6WUDLJKW6WLWFK
6HWVWLWFKOHQJWKWRPHGLXP
0DNHVXUHQHHGOHSRVLWLRQLVOLQHGXS
1. Open zipper by pulling down on the slider and
pull tab located at the top of the zipper.
2. Working on the right side of the fabric, baste the
zipper face down along the seam edge of the
right-hand side of garment. The teeth or coils of
the zipper lay toward the interior of the seam.
3. Line up the teeth (coils) of the zipper with the
right groove of the zipper foot. The needle will
penetrate the tape of the zipper alongside the
teeth (or coils).
4. Sew from top to bottom of the seam as far as
possible, backstitching at the beginning and end
of the seam.
5. To sew the other side of the zipper, flip the
zipper over twice to the left and then line up
the tape of the opposite side of the zipper
along the seam edge of the left-hand side of
the project.
6. Line up the teeth of the zipper with the left
groove of the zipper foot.
7. Sew from top to bottom of the seam as far as
possible, backstitching at the beginning and
end of the seam.
8. Close the zipper.
9. Remove the Invisible Zipper Foot and replace
it with the regular Zipper Foot.
10. Sew a 5/8'' seam all the way down to the
bottom of the seam, starting as close to the
zipper as possible.

Singer 6699 Specifications

General

Brand	Singer
Model	6699
Category	Sewing Machine
Language	English