90
B
c
d
C
D
E
c. By pressing the far left cursor “I<” button, the
fi rst selected pattern will be highlighted.
d. By pressing the far right cursor “I>” button, the
cursor is moved to the right side of selected
patterns.
The cursor is used to check selected patterns,
insert patterns, delete patterns or editing of each
pattern as described below.
If the settings of the highlighted pattern can be
changed, it will be noted in the center line of the
LCD.
C. TO CHECK SELECTED PATTERNS
As the length of the string increases, patterns will
disappear from sight.
You can check patterns by shifting cursor to the
left.
D. INSERTING PATTERN
1. Machine will insert a pattern to the left of the
highlighted letter or pattern.
2. Using the cursor buttons, move the cursor to
highlight the pattern just before the desired
position for the new pattern. Select the pattern.
E. TO DELETE PATTERN
1. Shift the cursor to the pattern you want to
delete.
2. Press the clear “C” button quickly (less than 0.5
sec.).
Machine will delete the pattern and cursor will
shift to next pattern.
a. When the cursor is at furthest right side,
machine will delete just before pattern.
3. If you want to delete all patterns, press and hold
the clear “C” button (over 0.5 sec.).
Machine will delete all selected patterns.
To Next Page
Loading...
Need help?
General
