OCTAVIA
S00.5123.51.20
------------
-------------
♦ Workshop crane, (e.g. V.A.G 1202 A)
♦ Drip tray, (e.g. V.A.G 1306)
♦ Torque wrench
♦ Engine/gearbox jack, (e.g. V.A.G 1383 A)
♦ Pliers for spring strap clips
♦ Engine holder T10012
♦ Engine holder MP 1-202
♦ Holder MP 1-224
♦ Repair stand MP 9-101
♦ Suspension device MP 9-201
♦ Grease G 000 100
(models with manual gearbox)
♦ Hot bolt paste G 052 112 A3
♦ Bolt M10 x 25/8.8
♦ Cable straps
♦ Wire
♦ Adhesive tape
Notes:
♦ The engine is lifted up and out together with
the gearbox.
♦ All the cable straps which are detached or
cut open when removing the engine, should
be fitted on again at the same point when
installing the engine.
♦ Hose connections are secured with screw-
type, spring strap or collar clamps. Always
replace collar clamps by spring strap clips
or screw-type clips.
ProCarManuals.com
To Next Page
Loading...
Need help?
General
