EasyManuals Logo

Skoda ROOMSTER User Manual

Skoda ROOMSTER
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Instruments and Indicator/Warning Lights 17
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data
affix the sticker with the entry of the following service interval to the
side of the dash panel on the driver's side.
The Service Interval Display can also be reset with the reset button as
follows:
Switch off the ignition, press the reset button of the trip counter for
distance driven and hold it down.
Switch the ignition on and release the reset button. Now turn the reset
button to the right. The service interval display is reset.
Caution
We recommend that you do not reset the Service Interval Display yourself
otherwise this can result in the service interval display being incorrectly
set, which may also result in problems with operation of your vehicle.
Note
Never reset the display between service intervals otherwise this may
result in incorrect readouts.
information is retained in the Service Interval Display also after the
battery of the vehicle is disconnected.
it is necessary to re-code the Service Interval Display if a new instru-
ment cluster is installed during repair work. This work is carried out by a
specialist garage.
The data displayed is the same after resetting the display with flexible
service intervals (QG1) using the reset button as that for a vehicle with
fixed service intervals (QG2). We therefore recommend having the
Service Interval Display reset only by a Škoda Service Partner who is
familiar with the procedure for resetting the display with a vehicle system
tester.
Please refer to the brochure Service schedule for extensive informa-
tion about the service intervals.
Digital clock
A reset button is installed on the left below beside the speedom-
eter for adjusting the clock page 13, fig. 2.
Set hours
Turn the reset button to the left.
Setting minutes
Turn the reset button to the right.
WARNING
The clock should not be adjusted while driving for safety reasons
but only when the vehicle is stationary.
Multi-functional indicator (onboard
computer)*
Introduction
The multi-functional indicator appears in the display page 18, fig. 5 or
in the information display page 22, fig. 8 depending on the equipment
fitted to your vehicle.
The multi-functional indicator offers you a range of useful information
A
6
NKO
20
A05
.
book
Page
17
Wednesday
,
June
21
,
2006
1:42
PM

Table of Contents

Other manuals for Skoda ROOMSTER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skoda ROOMSTER and is the answer not in the manual?

Skoda ROOMSTER Specifications

General IconGeneral
BrandSkoda
ModelROOMSTER
CategoryAutomobile
LanguageEnglish

Related product manuals