Lights and Visibility60
Main beam
– Switch on the low beam.
– Push the lever forwards - the main beam and warning light in
the instrument cluster come on.
– Pull the lever back into the initial position in order to switch the
main beam off again.
Headlight flasher
– Pull on the lever of the steering wheel (sprung position) - the
main beam and warning light in the instrument cluster come
on.
Parking light
– Switch off the ignition.
– Push the lever up or down - the right-hand or left-hand parking
light is switched on.
Information concerning the function of the lights.
• The turn signal system only operates when the ignition is switched
on. The corresponding indicator light or in the instrument cluster also
flashes.
• The turn signal is automatically cancelled after negotiating a curve.
• The side light and rear light on the appropriate side of the vehicle are
switched on when the parking light is selected. The parking light function
only operates if the ignition is switched off.
• An acoustic warning signal will sound when the driver's door is opened
if the lever is not in the middle position after removing the ignition key. The
acoustic warning signal will stop just as soon as the driver's door is closed.
Caution
Use main beam or the headlight flasher only if this does not risk dazzling
other road users.
Note
Use only in accordance with the legal requirements the described lighting
and signal systems.
Interior lighting
Front interior lighting and storage compartment on
front passenger side
Fig. 38 Detail of the
headliner: front interior
lighting
To Next Page
Loading...
Need help?
General
