41
Skydio X10 - Operator Manual © 2023 Skydio, Inc. All rights reserved.
Maintenance
Pre-warming Skydio X10 Batteries
If Skydio X10 detects that a battery is too cold to launch, the battery will
automatically begin self-warming. Launch will become unblocked when the battery
is suciently warmed for the given state of charge.
You also have the option to prewarm a battery before inserting into the drone:
Step 1 - Triple tap the battery button to begin the self-warming process
• The lights on the battery will turn orange during the self-warming process
• Triple tapping again will end the self-warming process
Step 2 - If the battery is cold enough it will begin self-warming
• When self-warming is complete, the lights on the battery will briefly turn
blue and then power o
Step 3 - Insert the battery into the drone and power on
• If the self-warming was still in progress prior to inserting, it will continue
while the battery is in the drone
• Launch will become unblocked when the battery is suciently warmed for
the given state of charge
To Next Page
Loading...
Need help?
General
