Smartrise C4 Quick Start Guide

2023 © Smartrise Engineering, Inc. All Rights Reserved
..C4 Quick Start Guide..
6
3 Automatic Mode
3.1 High Speed Runs
Once the hoistway learning is completed, the elevator can start making multiple floor runs.
Manual car calls can be placed using the following steps:
1. Navigate to MAIN MENU.
2. Go to DEBUG.
3. Select ENTER CAR CALLS.
4. Select FRONT or REAR.
Disable the doors by turning on DIP A3.
Perform the following steps for Workout Mode:
1. Navigate to MAIN MENU.
2. Go to DEBUG.
3. Go to DEBUG RUNS.
4. Select DWELL TIME.
3.2 S-curve & Slowdown Distance Adjustments
S-curve adjustments can be done from the controller by following these instructions:
1. Navigate to MAIN MENU.
2. Go to SETUP.
3. Go to S-CURVE.
The slowdowns are calculated automatically depending on how aggressive the S-curve is set. However,
the final leveling distance may be increased, if desired, by applying these instructions:
1. Navigate to MAIN MENU.
2. Go to SETUP.
3. Go to S-CURVE.
4. Select NORMAL PROFILE.
5. Select LEVELING DISTANCE.
3.3 Vibrations on High Speed
If the car is running at the commanded speed and without faults but there are vibrations felt both inside
the car and in the machine room, try the following:

Smartrise C4 Specifications

General

Brand	Smartrise
Model	C4
Category	Controller
Language	English