20
C
ONFIGURING
THE
W
IRELESS
B
ARRICADE
G
R
OUTER
The Wireless Barricade g Router can be configured by Internet
Explorer 5.5 or above. Using the web management interface, you
can configure the Wireless Barricade and view statistics to
monitor network activity.
Note: Before you attempt to configure your Wireless
Barricade, if you have access to the Internet please
visit www.smc.com
and download the latest firmware
update to ensure your Wireless Barricade is running
the latest firmware.
Before you attempt to log into the web-based administration,
please verify the following.
1. Your browser is configured properly (see below).
2. Disable any firewall or security software that may be running.
3. Confirm that you have a good link LED where your computer
is plugged into the Wireless Barricade. If you don’t have a link
light, then try another cable until you get a good link.
Browser Configuration
Confirm your browser is configured for a direct connection to the
Internet using the Ethernet cable that is installed in the computer.
To Next Page
Loading...
Need help?
General
