SMC Networks Barricade SMCWBR14-G User Manual (English)

Other manuals for SMC Networks Barricade SMCWBR14-G

Questions and Answers:

B
Bobby SullivanJul 30, 2025
What to do if wireless clients cannot access the network on my SMC Networks Barricade SMCWBR14-G Wireless Router?
- R
  Robert GonzalezJul 30, 2025
  If wireless clients are unable to connect to the network, ensure that the Wireless Barricade and the wireless clients are configured with the same Service Set ID (SSID). If authentication or encryption are enabled, ensure that the wireless clients are properly configured with the appropriate authentication or encryption keys. Also, if MAC address filtering is enabled, be sure the client’s address is included in the local filtering database. If the wireless clients are roaming between Wireless Barricades, ensure that all the access points and wireless devices in the Extended Service Set (ESS) are configured to the same SSID and authentication method.
J
Joseph GomezAug 4, 2025
How to fix an IP address starting with 169.254.xxx.xxx on my SMC Networks Barricade SMCWBR14-G?
- J
  Jeremiah WardAug 5, 2025
  If you are getting an IP Address that starts with 169.254.xxx.xxx, confirm that you have a good link light on the Wireless Barricade for the port to which this computer is connected. If not, try another cable. If you have a good link light, open a DOS window and type ipconfig/renew. If you are still unable to get an IP address from the Wireless Barricade, try rebooting your PC.
K
Karen BensonAug 11, 2025
What to do if I forgot the password for my SMC Networks Barricade SMCWBR14-G?
- B
  burkestephanieAug 11, 2025
  If you forgot or lost the password for your SMC Networks Wireless Router, set the Wireless Barricade to its default configuration by pressing the reset button on the back panel for 10 seconds or more. There is no password by default.
T
tharperAug 17, 2025
What to do if my SMC Networks Barricade SMCWBR14-G Wireless Router is still not functioning properly?
- M
  Melvin HubbardAug 17, 2025
  If all other recovery measures fail, and the Wireless Barricade is still not functioning properly, reset the Wireless Barricade’s hardware using the web interface, or through a power reset. You can also reset the Wireless Barricade to its default configuration by pressing the reset button on the back panel for 10 seconds or more, then click LOGIN to access the management interface.
B
Brittany MillerAug 23, 2025
Why is the 10/100 LED not lighting up on my SMC Networks Wireless Router?
- M
  Mary FritzAug 25, 2025
  If the 10/100 LED does not light after a connection is made on your SMC Networks Wireless Router, check that the host computer and the Wireless Barricade are both powered on, and be sure the network cable is connected to both devices. Verify that Category 5 cable is used if you are operating at 100 Mbps, and that the length of any cable does not exceed 100 m (328 ft). Also, check the network card connections. Note that the 10BASE-T/100BASE-TX port, network card, or cable may be defective.

SMC Networks Barricade SMCWBR14-G Specifications

General

Wireless Standard	802.11b/g
Frequency Band	2.4 GHz
Maximum Wireless Speed	54 Mbps
Security	WEP, WPA, WPA2
Antenna Type	External, Detachable
Ports	4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN
Firewall	SPI firewall
VPN Support	PPTP, IPSec