SMC Networks IDFA3E-23-A User Manual

7 Specification for Option A
7 - 1
7 Specification for Option A
7-1 Safety instructions
When handling the product, take care to the following precautions.
7-2 Specification
The specification for this air dryer is used for cooling down the compressed air. The compressed air
comes out after cooled down and dehumidified without reheating. Remind that the air flow capacity is
less than the standard models.
7-3 Air piping
Since cool air comes out from an outlet of air dryers, carefully attach thermal insulation to the piping
at air outlet and keep the piping length as short as possible in order to prevent condensation on the
outlet piping and temperature increase on the outlet due to ambient temperature.
7-4 Dryer specifications
Models
IDFA3E
IDFA4E
IDFA6E
IDFA8E
IDFA11E
Air flow rate
(ANR)
18 m
3
/h
23 m
3
/h
29 m
3
/h
32 m
3
/h
39 m
3
/h
Outlet air temp.
10C
・The data for ANR is referring to the conditions of 20C, 1atm. pressure & relative humidity of 65%.
・This air dryer for cooling compressed air indicates temperature, while the standard product indicates
dew point of outlet air pressure.
・The conditions are the same as the ones for standard models other than air flow capacity.
Warning
Shut off the power supply when removing the panel for maintenance work, etc. The product
has a fan(s) and could cause serious danger to operators.

SMC Networks IDFA3E-23-A Specifications

General

Brand	SMC Networks
Model	IDFA3E-23-A
Category	Dehumidifier
Language	English