9 Specification for Option K
9 - 1
9 Specification for Option K
When performing the installation and maintenance of the product, the following points must be
understood and followed. Additionally, for replacement work, read 4-2 “Periodical Maintenance”.
9-1 Safety instructions
When handling the product, take care of the following precautions.
1. Do not remove the auto drain if air pressure remains in the product. When removing the
auto drain, stop the supply of air to the primary side of the product, exhaust the air from the
secondary side and ensure there is no residual pressure. If the air pressure is left inside of
the product, parts could suddenly pop out and cause accident when loosened.
2. Put gloves to prevent injury when removing the auto drain.
3. Operator could touch the drain waste from repalced auto drain. Follow the procedures
prepared by the customer to ensure the safety of the operators. (Ex. Put protective goggles,
apron and/or gloves to protect body from toucing the drain waste when performing
maintance on the product.)
To Next Page
Loading...
Need help?
General