SMC Networks ISE80 User Manual

-32-
No.PS※※-OMM0003-J
■[F 8] Auto-preset function
When hysteresis mode is selected, the auto-preset function can calculate an optimum pressure value
automatically based on the on-going operation.
<Operation>
Press the
or button in function selection mode to display [F 8].
Press the
button.
Move on to setting of auto-preset.
Press the
button to set.
Return to function selection mode.
Setting of [F 8] Auto-preset completed
Press the
button during measurement mode to set the pressure.
Then press the
button again to change the set pressure, while the display is flashing.
Setting of Auto-preset
Press the or button to select auto-preset.

SMC Networks ISE80 Specifications

General

Brand	SMC Networks
Model	ISE80
Category	Switch
Language	English