SMC Networks ProtoCessor FPC-ED2 User Manual

Additional Information
VorTek ProtoCessor Start-up Guide 52
10.9 Routing Settings
The Routing settings make it possible to set up the IP routing rules for the FieldServer’s internet and network
connections.
• Click the Add Rule button to add a new row and set a new Destination Network, Netmask and
Gateway IP Address as needed.
• Set the Priority for each connection (1-255 with 1 as the highest priority and 255 as the lowest).
• Click the Save button to activate the new settings.
Figure 52: Routing Settings

SMC Networks ProtoCessor FPC-ED2 Specifications

General

Brand	SMC Networks
Model	ProtoCessor FPC-ED2
Category	Control Unit
Language	English