SMC Networks SMC8014WN User Manual

錯誤! 尚未定義樣式。
63
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Figure 36. Special Application Menu
To enable port triggering:
1. In the Special Application menu, check Enable Triggering if it is unchecked and click the
Apply button. The Trigger Table becomes available.
2. Click the Add button below Trigger Table. The Trigger menu appears (see Figure 37).
3. Complete the fields in the Trigger menu (see Table 17).
4. Click Apply. (Or click Back to return to the Trigger menu or Cancel to cancel any
selections you made.) If you clicked Apply, the trigger is added to the Trigger Table on
the Special Application menu.
5. To configure additional triggers (up to 20), repeat steps 1 through 4. When you finish, click
Apply in the Special Application menu to save your settings.
6. To change the settings for a trigger, click the radio button to the left of the trigger in the
Trigger Table and click the Edit button. When the Trigger menu appears, edit the settings
as necessary (see Table 17) and click Apply. Click Apply in the Special Application menu
to save your settings.
7. To delete a trigger, click the radio button to the left of the trigger in the Trigger Table and
click the Delete button. No precautionary message appears before you delete a trigger.
Click Apply in the Special Application menu to save your settings.

SMC Networks SMC8014WN Specifications

General

Brand	SMC Networks
Model	SMC8014WN
Category	Gateway
Language	English