SMC Networks ZSE20B-L User Manual

-78-
No.PS※※-OMV0006-D
Maintenance
How to reset the product after a power cut or forcible de-energizing
The setting of the product will be retained as it was before a power cut or de-energizing. The output condition
is also basically recovered to that before a power cut or de-energizing, but may change depending on the
operating environment. Therefore, check the safety of the whole installation before operating the product. If
the installation is using accurate control, wait until the product has warmed up (approximately 10 to 15
minutes).
Forgotten the security code
If you have forgotten your security code, please contact SMC directly.

SMC Networks ZSE20B-L Specifications

General

Brand	SMC Networks
Model	ZSE20B-L
Category	Switch
Language	English