-37-
PS##-OMM0003-A
■[F10] Setting of security code
Security code can be entered during the key-lock is released.
<Operation>
Press the
or button in function selection mode to display [F10].
Press the
button.
Move on to setting of security code.
Press the
button to set.
Return to function selection mode.
Setting of [F10] security code completed
If the security code is used, it is necessary to input the security code to release the key lock.
The security code can be set optionally by the operator.
Default setting is "000".
Refer to page 42 when the security code is used.
Setting of security code
[Pin] and set value are displayed in turn.
Press the
or button to select security code.
To Next Page
Loading...
Need help?
General
