SMC Networks ZSE80(F) User Manual

-45-
PS##-OMM0003-A
Troubleshooting
○Troubleshooting
Applicable Pressure switch: ZSE80(F)/ISE80(H)
If a cause applicable to the failure cannot be identified and normal operation can be recovered by
replacement with a new Pressure switch, this indicates that the Pressure switch itself was broken. The
Pressure switch breakage can be caused by operating environment (network construction, etc.), and so
consult with SMC separately to obtain countermeasures.
Yes
No
The Pressure
switch does not
operate normally
Refer to
reference No.1
The switch output
is on
The indication
light is on
The indication light
works improperly
The switch output
is off
The switch output
generates
chattering
The indication
light is off
The indication
light is off
The indication
light is on
The product is
broken
Refer to
reference No.2
Refer to
reference No.1
Refer to
reference No.4
Refer to
reference No.3
The product is
broken
The product is
broken
Analog output is
not provided
(Specified accuracy
is not satisfied)
Refer to
reference No.6
Slow switch
output response
Refer to
reference No.5
An error signal
comes on
Refer to
reference No.7

SMC Networks ZSE80(F) Specifications

General

Brand	SMC Networks
Model	ZSE80(F)
Category	Switch
Language	English