-39-
PS##-OMM0003-A
•Function of setting
Order Function Applicable model
1 Selection of display unit Model with unit conversion function
2 Setting of output mode (OUT1) All models
3 Setting of reversed output (OUT1) All models
4 Setting of pressure (OUT1) All models
5 Setting of hysteresis (OUT1) All models
6 Setting of display color All models
7 Setting of output mode (OUT2)
8 Setting of reversed output (OUT2)
9 Setting of pressure (OUT2)
10 Setting of hysteresis (OUT2)
Output type other then N and P
11 Setting of response time All models
12 Setting of grey wire function
13 Setting of auto-shift function
14 Setting of effective output
Only output type of R, S, T, and V
15 Setting of display resolution All models
16 Setting of fine adjustment of display value All models
17 Setting of initialization of fine adjustment of display value All models
18 Setting of auto-preset All models
19 Setting of power saving mode All models
20 Setting of security code All models
Press the
button for 2 seconds or longer.
Measurement mode
∗: Measurement mode can return from any setting item by pressing the button for 2 seconds or longer.
∗: Function that will be set by the return to the measurement mode is memorized.
To Next Page
Loading...
Need help?
General
