Sony BDV-E6100 User Manual

51
US
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-733-11(1)
D:\NORM'S JOB\SONY HA\SO120029\BDV-
E6100_4100_3100_E2100\4446733111_US (U2)\090SET.fm
masterpage: Right
Settings and Adjustments
x [System Information]
You can display the system’s software
version information and the MAC address.
x [Software License Information]
You can display the Software License
Information.
[Network Settings]
x [Internet Settings]
Connect the system to the network
beforehand. For details, see “Step 3:
Preparing for Network Connection”
(page 21).
[Wired Setup]
: Select this when you
connect to a broadband router using a LAN
cable.
[Wireless Setup(built-in)]: Select this when
you use the built-in wireless LAN of the
system for wireless network connection.
For further details, visit the following website and
check the FAQ:
http://www.sony.com/blurayhtsupport/
x [Network Connection Status]
Displays the current network connection
status.
x [Network Connection
Diagnostics]
You can run the network diagnostic to
check if the network connection has been
made properly.
x [Connection Server Settings]
Sets whether or not to display the
connected DLNA server.
x [Renderer Options]
[Auto Access Permission]: Sets whether or
not to allow automatic access from a newly
detected DLNA controller.
[Smart Select]: Allows a Sony DLNA
controller to find the system as the target
equipment to operate by using the infrared
ray. You can set this function to on or off.
[Renderer Name]: Displays the system’s
name as it is listed on other DLNA devices
on the network.
x [Renderer Access Control]
Sets whether or not to accept commands
from DLNA controllers.
x [PARTY Auto Start]
[On]
: Starts a PARTY or joins an existing
PARTY at the request of a networked
device compatible with the PARTY
STREAMING function.
[Off]: Off.
x [Registered Remote Devices]
Displays a list of your registered remote
devices.
To use this function, be sure to perform the
software update (page 46).
x [Remote Start]
[On]: Allows turn on the system by a
device linked via network when the system
is in standby mode.
[Off]
: The system cannot be turned on by a
device linked via network.
Tip
Note

Sony BDV-E6100 Specifications

General

Disc loading type	Tray
Disc types supported	BD, BD-R, BD-RE, BD-ROM, CD, CD-R, CD-RW, DVD, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW
Playback disc formats	Blu-Ray audio, Blu-Ray video, CD audio, CD video
Number of optical discs	1 discs
Optical disc player type	Blu-Ray player
Built-in HDD	No
RS-232 ports	0
Parental control	Yes
File format system	FAT32/NTFS
Remote control type	RM-ADP091
Image formats supported	GIF, JPG, PNG
Apple docking compatibility	Not supported
Video formats supported	AVCHD, MPEG1, MPEG2, MPEG4, WMV9, XVID
Audio decoders	DTS, DTS 96/24, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD HR, Dolby Digital, Dolby TrueHD
RMS rated power	1000 W
Audio output channels	5.1 channels
Audio formats supported	AAC, LPCM, WMA
Supported radio bands	FM
Preset stations quantity	20
Front speakers RMS power	125 W
Center speaker RMS power	250 W
Wireless satellite speakers	-
Product color	Black
USB version	2.0
Number of HDMI outputs	1
Consumer Electronics Control (CEC)	BRAVIA Sync

Weight and Dimensions

Main unit weight	2700 g
Subwoofer weight	5800 g
Center speaker weight	580 g
Satellite speaker weight	1400 g
Main unit dimensions (WxDxH)	430 x 296 x 50.5 mm
Subwoofer dimensions (WxDxH)	225 x 345 x 365 mm
Front speaker dimensions (WxDxH)	100 x 100 x 650 mm
Center speaker dimensions (WxDxH)	240 x 85 x 90 mm