20
Playing back a tape
You can monitor the playback picture on the LCD screen.
(1) While pressing the small green button on the POWER switch, set it to
PLAYER.
(2) Insert the recorded tape with the window facing out.
(3) While pressing OPEN, open the LCD panel. Adjust the angle of the LCD panel
or the brightness of the LCD screen if necessary.
(4) Press 0 to rewind the tape.
(5) Press ( to start playback.
(6) Adjust the volume using VOLUME and adjust the brightness of the LCD
screen using LCD BRIGHT.
You can also monitor the picture on a TV screen, after connecting the camcorder to a TV
or VCR.
To stop playback, press p.
To rewind the tape, press 0.
To fast-forward the tape rapidly, press ).
1
2
3
5
6
VOLUME
POWER
OFF
PLAYER
CAMERA
4
PLAY
REW
LCD BRIGHT
To Next Page
Loading...
Need help?
General