22
Various playback modes
You can enjoy clear pictures on the LCD screen during still, slow and picture search.
(Crystal-clear still/slow/picture search)
To view a still picture (playback pause)
Press P during playback. To resume playback, press P or (.
To locate a scene (picture search)
Keep pressing 0 or ) during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing the tape or
rewinding (skip scan)
Keep pressing 0 while rewinding or ) while advancing the tape. To resume
normal playback, press (.
To view the picture at 1/5 speed (slow playback)
– CCD-TRV36/TRV43/TRV46 only
Press & on the Remote Commander during playback. To resume normal playback,
press (. If slow playback lasts for about 1 minute, it shifts to normal speed
automatically.
Notes on playback
•Noise may appear when you use the crystal-clear still/slow/picture search function to
play back the tape recorded in LP mode.
•Streaks appear and the sound is muted in the various playback modes.
•When playback pause mode lasts for 5 minutes, the camcorder automatically enters
stop mode.
•Horizontal noise appears at the center, or top and bottom of the screen when you play
back a tape in reverse. This is normal.
•You can play back the tapes recorded in the Hi8 video system on the standard 8 mm
camcorder (CCD-TRV16 only).
Playing back a tape
To Next Page
Loading...
Need help?
General