55
Using the menu
For details on the operation
1
page 43
5 Press z at the desired cutting point.
• When you want to adjust the cutting point, select [c/C] (frame rewind/forward) and adjust the
cutting point using b/B.
• If you want to change the cutting point, select [Cancel]. The playback of the movie starts again.
6 Select [OK] with v/V, and press z.
7 Select [OK] with v, then press z.
The movie is cut.
• The cut movies are assigned new numbers, and then recorded as the newest files in the selected recording
folder.
• You cannot cut the following kinds of images.
– Still image
– Movies not long enough to cut (shorter than about two seconds)
– Protected movies (page 50)
See page 56.
Records an enlarged image (
t step 6 in “Read This First”) as a new file.
1 Press MENU during playback zoom to display the menu.
2 Select [Trimming] with B on the control button, then press z.
3 Select the image size with v/V, then press z.
The image is recorded, and the original image is displayed again.
• The trimmed image is recorded as the newest file in the selected recording folder, and the original image is
retained.
• The quality of trimmed images may deteriorate.
• You cannot trim to an image size of [3:2] or [16:9].
(Setup)
Trimming
Trimming
See the following procedure.
Return
Cancels trimming.
00:00:02
10/10
STD
6 40
Divide
Dividing
Point
O K
Cancel
Exit
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
