30
GB
Getting Started
[ON]: The system outputs progressive
signals. Select this setting when:
– your TV accepts progressive signals,
and,
– the TV is connected to the
COMPONENT VIDEO OUT jacks.
When you select [ON], the confirmation
display appears. Follow the Steps below.
8 Press C/c to select [START].
The system outputs the progressive signal
for 5 seconds. Check that the screen is
displayed correctly.
9 Press C/c to select [YES].
The system outputs the progressive signal.
When you select [NO], the system does not
output the progressive signal.
Step 4: Enjoying Sound
from all the Speakers
You can enjoy DVD, TV, or VCR sound from
all the speakers in this system.
1 Press FUNCTION +/– repeatedly until
the desired function appears in the
front panel display.
Each time you press FUNCTION +/–, the
function changes as follows.
“DVD” t “TUNER FM” t “TUNER
AM” t “USB”* t “TV/VIDEO” t
“DMPORT”** t “AUDIO” t …
Function Source
“DVD” Disc that is played by the
system
“TUNER FM”/
”TUNER AM”
FM/AM radio (page 61)
“USB”* USB device (page 67)
“TV/VIDEO” TV (or the component that
is connected to the TV/
VIDEO jacks on the rear
panel)
“DMPORT”** DIGITAL MEDIA PORT
adapter (page 76)
“AUDIO” Portable audio source (that
is connected to the AUDIO
IN jack on the front panel)
FUNCTION
+/–
SYSTEM
MENU
X/x/c,
To Next Page
Loading...
Need help?
General
