166
(7) Connect the USB jack on your computer to the (USB) jack on your camcorder
using the supplied USB cable.
(8) Press N to start playback.
The picture from the tape appears on preview window on your computer.
Viewing pictures live from your camcorder
(1) Follow the steps 1, 2 on page 165.
(2) Set the POWER switch to CAMERA.
Select USB STREAM in
to ON in the menu settings (p. 183).
(3) Follow the steps 4 to 7 on pages 165 and 166.
The picture from your camcorder appears on preview window on your
computer.
Capturing still images
(1) Select .
(2) Looking at the preview window, move the cursor to
and press it at the
point you want to capture.
The still image on the screen is captured.
Captured images are displayed in the thumbnail list window.
Viewing images recorded on a tape with your computer
– For Windows users
USB jack
Push into the end
(USB) jack
USB cable (supplied)
Preview window Thumbnail list widow
To Next Page
Loading...
Need help?
General
