Sony DVS-2000C User Manual

soit umes lll
1-8
1 BDU
Section 1 OPERATION
1-1-4 ALOCER
TUL pRROBEELICIWT
BRAT VY pRRMERESLITS TCL CSE
XV,
RAF ROBT O BROMO NTEEORMD, POLST
REBLISLEM, WROTE ERP Fo TK FEW.
o BEA SLTSAMIC. BTA yF+~—-OPOWER
AA y FROFFID UTS BSW,
@ POWERA 4 vy FOMBLIOUOTIL, RN-VETHKX KE
Wa,
o PRE BUMARR,. BREANHSZL EM, Aty
Fo -AMICRMENTHISZ AVY bBSLRMILRA
EHTOIBAAGY bBSRB-HRHECMS TL SALT
»5, POWERAY yFRONIUL TIRED,
HORA FoONGH oA, MAMET STL
RHEVET.
ROM PACK/MEMORY PACKOER WRLC DUT
- ROP OBR DIS, SNK BRB SO EDIEL
TOBE, EE. MOMB*7SALO. HRLAUC§K
HEV,
BIR RUE
Section 1 OPERATION
1-1-4 Usage and Handling Precautions
Handling of circuit boards
Do not remove circuit boards unless absolutely neces-
sary. When it is necessary to remove circuit boards for
maintenance or to install optional boards, observe the
following precautions.
¢ Be sure to turn the POWER switch off before inserting
orremoving a board.
For the location of the POWER switch, see next page.
e After installing a board, and before turning the
POWERswitch on, check to be sure that the slot
number printed on the interior of the switcher matches
the slot number printed on the board.
|
Failure to observe these precautions may result in
damage to the switcher circuits.
Handling of ROM and memory packs
When handling the ROM and memory packs, take care
not to touch the connector edges. Do not disassemble or
subject to strong shocks.

Sony DVS-2000C Specifications

General

Brand	Sony
Model	DVS-2000C
Category	Switch
Language	English