23
GB
Other Operations
Setting the light
illumination
You can set a light illumination from a
variety of illumination patterns. The light
illumination will create lighting effects
based on the music source.
Press LED SPEAKER repeatedly.
Each time you press the button, the
pattern changes.
To turn off the light illumination
Press LED SPEAKER repeatedly to select
“LED OFF”.
Note
If the light illumination brightness is glaring,
switch on the room lights or turn off the light
illumination.
Using the timers
The system offers 2 timer functions. If
you use both timers, the Sleep Timer has
priority.
You can fall asleep while listening to
music. The system turns off after the
preset time.
Press SLEEP repeatedly.
To cancel Sleep Timer, press SLEEP
repeatedly to select “OFF”.
Tip
To check the remaining time before the system
turns off, press SLEEP.
You can wake up to tuner or USB device
at a preset time.
Make sure you have set the clock.
1 Prepare the sound source, then
press VOLUME +/– to adjust the
volume.
2 Press TIMER MENU.
3 Press / repeatedly to select
“PLAY SET”, then press .
4 Set the time to start playback.
Press / repeatedly to set the
hour/minute, then press .
5 Use the same procedure as in
step 4 to set the time to stop
playback.
6 Press / repeatedly to select
the sound source you want, then
press .
7 Press ?/1 to turn off the system.
To check the timer setting or
activate the timer again
1 Press TIMER MENU.
“TIMERSEL” flashes in the display
panel.
2 Press .
3 Press / repeatedly to select
“PLAY SEL”, then press .
To cancel the timer
Repeat the same procedure as above and
select “OFF” in step 3, then press .
Notes
• The system turns on before the preset time. If
the system is turned on at the preset time or if
“STANDBY” flashes in the display panel, the
Play Timer will not play.
• Do not operate the system from the time the
system turns on until the playback starts.
Sleep Timer
Play Timer
To Next Page
Loading...
Need help?
General
Weight and Dimensions
