8
DCR-HC32E/HC33E/HC39E/HC42E/HC43E 2-584-907-11(1)
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (P series) (p. 106) after
attaching it to your camcorder.
POWER
switch
DC plug
Handycam
Station
DC IN jack
AC Adaptor
To the wall socket
1 Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
2 Slide the POWER switch up to
OFF (CHG). (The default setting.)
3 Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
With the
mark facing up
DC IN jack
4 Connect the mains lead to the AC
Adaptor and the wall socket.
5 Insert the camcorder into the
Handycam Station securely, all
the way to the bottom.
CHG (charge) lamp
The CHG (charge) lamp lights up and
charging starts.
• When inserting the camcorder into the
Handycam Station, close the DC IN jack
cover.
To Next Page
Loading...
Need help?
General