Quick Start Guide
12
Recording still images
1 Attach the charged battery pack to the camcorder.
To charge the battery, see page 16.
2 Insert a “Memory Stick Duo” into the camcorder.
a Slide the BATT (battery release)
lever in the direction of 1 and push
it down in the direction of 2.
Remove the battery terminal cover
when it lifts up in the direction of 3.
b Attach the battery pack with its
terminal side facing your camcorder
as shown in the illustration and press
down the battery pack until it clicks.
Insert it so that the B mark
is at the upper right corner.
Push in until it clicks.
BATT (battery release) leve
B mark
To Next Page
Loading...
Need help?
General