Lens
(for ENG/EFP)
VCT-14 Tripod
Attachment
Tripod
USB flash drive
Camera hanger
e)
HDVF-EL70
Viewfinder
CAC-6
Return Video Selector
Intercom headset
Microphone
HDLA1500-series Large
Lens Adaptor
Lens
(for studio camera)
HDVF-EL75/L750/L770
Viewfinder
HDC5500
Color Camera
CAC-6
Return Video Selector
Intercom headset
CAC-12
Microphone
Holder
Microphone
HDVF-EL20
HDVF-EL30
Viewfinder
USB flash drive
CAC-6
Return Video Selector
Intercom headset
Microphone
BKP-7911 Script Holder
V-wedge shoe
(attached to tripod)
Tripod
HDCU5500
a)
MSU-1000 series
Master Setup Unit
RCP-3000/1000 series
Remote Control Panel
Video
monitor
Waveform
monitor
Video router
CCA-5
Hub
4K video
monitor
BNC
LAN cable
Sync signal input
Return video input
Intercom
microphone input
HDC3500, HDC2000
series
d)
Color Camera
a) Set the signal type and signal transmission rate for the camera to connect using
the following menu items.
• SYSTEM CONFIG t <CAMERA I/F> t CABLE TYPE t FIBER CAMERA
CABLE
• SYSTEM CONFIG t <CAMERA I/F> t FIBER TRANSMIT RATE
(page 30)
b) Signal transfer up to a maximum of 4 km is possible when using the HDCU5000,
or 2 km when using the HDCU5500. However, the actual transfer distance and
shooting format may vary depending on the system configuration of the
cameras and the type of optical fiber cables used.
c) The HDCU5000 has two FIBER CABLE connectors. One connector can
connect with HDC5000/5500. The other can connect with HDC3500 and
HDC2000 series cameras. The HDCU5500 can connect with HDC5000/5500.
d) HDC2000 series: HDC2000/2580/2500/2400/1700
e) Attached to HDLA1500 series (Part No.: A-1128-405-A)
* Some models may not be available, depending on the country or region.
Optical fiber cable
b) c)
LAN cable
BNC
LAN cable
BNC
BNC
4K video
monitor
CCA-5
RCP-3000/1000
series
Remote Control
Panel
BKP-7911 Script Holder
USB flash drive
HDC5000
HDVF-EL70
Viewfinder
Lens
(for studio camera)
HDCU5000
a)
Sync signal input
Return video input
Intercom
microphone input