66
VIDEO/MONITOR Menu
VIDEO/MONITOR
Page name
Page No.
Item Set value Description
<COLOR BAR>
V01
4K/HD-BAR SELECT BAR 16:9(100%)
, BAR 16:9(75%),
SMPTE 16:9(BLACK), SMPTE
16:9(–I/Q), BAR 4:3(100%), BAR
4:3(75%), SMPTE 4:3(BLACK),
SMPTE 4:3(–I/Q), MF-ARIB(75%),
MF-ARIB(100%), MF-ARIB(+I),
MF-SMPTE(–I,Q),
MF-SMPTE(75%,Q),
MF-SMPTE(100%,Q),
MF-SMPTE(+I,Q), HD-CUSTOM,
SDI CHECK FIELD, Y-RAMP,
Y/C-RAMP, HD-CUSTOM2
Selects the color bars for 4K output/HD output.
MF-CB MODIFY
, EVEN Sets the stripe width for multi-format color bar output.
MODIFY: Stripe width adjusted to prevent colors
mixing in 4:3 Edge crop mode.
EVEN: Stripe width in accordance with standard.
SLOPE WIDE
, NARROW Sets the color difference signal band of the color
bars.
WIDE: Band not limited.
NARROW: Band is limited to prevent ringing.
SD
SOURCE 4K/HD BAR, SD BAR
Selects the color bar signal source for output to SD.
4K/HD BAR: Down converts the 4K/HD color bars
and then outputs it.
SD BAR: Outputs the SD color bars selected in
SELECT.
SELECT When SYSTEM CONFIG menu t
<MULTI FORMAT> page t
SYSTEM is set to 1.001(525):
SMPTE
, EIA, FULL, 95%,
NTSC100%, Y/C-RAMP, Y-RAMP
When SYSTEM CONFIG menu t
<MULTI FORMAT> page t
SYSTEM is set to 1.000(625):
SMPTE
, EIA, FULL, 95%,
PAL100%, Y/C-RAMP, Y-RAMP
Selects the SD color bars.
BAR-CHARACTER ON, OFF
Sets the character superimposition on the color bar
signal.
MOVING SYMBOL ON, OFF
Sets symbol moving on the color bar screen.
TYPE 0, 1, 2 Selects the symbol type.
SIZE SMALL
, LARGE Selects the symbol size.
2SI DIAMOND MARK ON, OFF
Sets the marker display for 4K 2SI output.
This function is for displaying a test pattern like the
following in the area at the bottom right of the 4K
color bar during 4K 2-sample interleave output. OK is
displayed if the connections for Links 1 to 4 are
correct, and OK is not displayed if they are incorrect.
This function can be used to check the connections.
Correct connections
When Link 1 and
Link 2 have been
swapped
To Next Page
Loading...
Need help?
General
