Sony HDCU5500 User Manual

81
<SNMP>
N15
SNMP ENABLE, DISABLE
Enables/disables SNMP.
Can be enabled by installing HZCU-SNMP50 SNMP
Agent Software (option).
PORT LAN-COM
Displays the connection port name.
NAME Displays the system name (ASCII code, up to 32
characters).
CONTACT Displays the system administrator’s name (ASCII
code, up to 32 characters).
LOCATION Displays the system installation location (ASCII
code, up to 32 characters).
V1
ENABLE ENABLE, DISABLE
Enables/disables SNMP V1.
V2C
ENABLE ENABLE, DISABLE
Enables/disables SNMP V2C.
V1/V2C
RO COMMUNITY sony
Displays the ReadOnly community name (ASCII
code, up to 32 characters).
ALLOW HOST ANY
, SPECIFIC Sets the hosts that can be connected.
ANY: Allow access from all IP addresses.
SPECIFIC: Allow access only from IP addresses
configured using the HOST IP ADDRESS items.
HOST1 IP
ADDRESS
0.0.0.0
to 255.255.255.255 Sets the address of a host that can connect with
access permission when ALLOW HOST is set to
SPECIFIC.
HOST2 IP
ADDRESS
HOST3 IP
ADDRESS
<SNMP TRAP>
N16
SNMP TRAP ENABLE, DISABLE
Enables/disables SNMP traps.
Selectable when SNMP is enabled. Fixed to
DISABLE when SNMP is disabled.
COMMUNITY Displays the trap community name (ASCII code, up
to 32 characters).
HOST1
IP ADDRESS 0.0.0.0
to 255.255.255.255 Sets the trap notification address.
VERSION V1, V2C Sets the trap version.
HOST2 Same setting items and values as HOST1.
HOST3 Same setting items and values as HOST1.
SEND TEST TRAP EXEC
Sends a test trap.
NETWORK
Page name
Page No.
Item Set value Description
Note

Sony HDCU5500 Specifications

General

Brand	Sony
Model	HDCU5500
Category	Control Unit
Language	English