Charging the battery pack
1
Close the LCD screen and attach
the battery pack.
2
Connect the AC Adaptor () and
the power cord (mains lead) ()
to your camcorder and the wall
outlet (wall socket).
The CHG (charge) lamp turns on.
The CHG (charge) lamp turns off when the
battery pack is fully charged. Disconnect
the AC Adaptor from the DC IN jack of
your camcorder.
Notes
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.
Battery pack
Align the mark on the
DC plug with that on
the DC IN jack.
To the wall outlet (wall socket)
CHG (charge)
lamp
DC IN jack
DC plug
To Next Page
Need help?
General