Sony HT-CT370 User Manual

6
US
Installing the Bar Speaker on a wall
You can install the Bar Speaker on a wall.
Prepare screws (not supplied) that are suitable for the wall material and
strength. As a plasterboard wall is especially fragile, attach the screws
securely to two studs in the wall beam. Install the Bar Speaker
horizontally, hung by screws in studs in a continuous flat section of the
wall.
Be sure to subcontract the installation to Sony dealers or licensed
contractors and pay special attention to safety during the installation.
Sony shall not be held responsible for accidents or damage caused by
improper installation, insufficient wall strength, improper screw
installation or natural calamity, etc.
1 Fix the supplied wall mounting brackets to the bracket fixing
holes on the bottom of the Bar Speaker with the supplied
screws so that the surface of each wall mounting bracket is as
shown in the illustration.
Fix the two wall mounting brackets to the left and right fixing
holes on the bottom of the Bar Speaker.
Useful functions
Notes
Screw (supplied)
Wall mounting bracket (supplied)
AC power cord (mains lead)

Sony HT-CT370 Specifications

General

FM radio	No
Product color	Silver
24p support	Yes
Subwoofer type	Active subwoofer
Subwoofer connectivity	Wireless
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS 96/24, DTS-HD Master Audio
RMS rated power	300 W
Audio output channels	2.1 channels
Receiver included	-
Apple docking compatibility	Not supported
HDMI in	3
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless