Sony HT-RT4 User Manual

12
GB
Operating the system
using the remote control
Point the remote control at the
Subwoofer’s remote control sensor.
Listening to sound from
the connected devices
Press INPUT repeatedly.
When you press INPUT once, the current
device appears in the front panel
display. Each time you press INPUT, the
device changes cyclically as follows.
“TV”  “ANALOG”  “BT”  “USB”
Listening to music from a
USB device
To view the USB content list on the TV
screen, make sure you connect the
system to the TV using HDMI cable.
Change the input of the TV to the input
which the Subwoofer is connected.
Listening to the sound
“TV”
• TV that is connected to the TV IN (OPTICAL)
jack
• TV compatible with the Audio Return
Channel (ARC) function that is connected to
the HDMI OUT (ARC) jack
“ANALOG”
Device (Digital media player, etc.) that is
connected to the ANALOG IN jack
“BT”
BLUETOOTH device that supports A2DP
(page 15)
“USB”
USB device that is connected to the (USB)
port (page 13)
Note

Sony HT-RT4 Specifications

General

Game mode	Yes
Audio decoders	Dolby Digital, Dolby Dual Mono
RMS rated power	- W
Audio output channels	5.1 channels
Subwoofer type	Active subwoofer
Cables included	Optical
Receiver included	-
Product color	Black
Audio formats supported	DTS, LPCM, PCM
Consumer Electronics Control (CEC)	BRAVIA Sync
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Power consumption (standby)	0.4 W
Power consumption (typical)	85 W

Weight and Dimensions

Depth	70 mm
Width	900 mm
Height	52 mm
Soundbar weight	2100 g
Subwoofer depth	315 mm
Subwoofer width	190 mm
Subwoofer height	392 mm
Subwoofer weight	7800 g