Sony HT-RT4 User Manual

30
GB
Supported Codecs
3)
SBC
4)
, AAC
5)
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling
frequency 32 kHz, 44.1 kHz, 48 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone, reception sensitivity,
antenna’s performance, operating
system, software application, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Subband Codec
5)
Advanced Audio Coding
Speaker section
Speaker system
Subwoofer system, Bass reflex
Speaker
160 mm cone type
General
Power requirements
220 V – 240 V AC, 50/60 Hz
Power consumption
On: 85 W
Standby: 0.5 W or less (Power saving
mode)
(When “CTRL” in “HDMI>” and “BTSTB”
in “BT >” are set to “OFF”)
Standby: 2.8 W or less
6)
(When “CTRL” in “HDMI>” or “BTSTB” in
“BT >” is set to “ON”)
Dimensions (w/h/d) (approx.)
190 mm × 392 mm × 315 mm
Mass (approx.)
7.8 kg
6)
The system will automatically enter
Power saving mode when there is no
HDMI connection and no BLUETOOTH
pairing history, regardless of the settings
you have made for “CTRL” in “HDMI>”
and “BTSTB” in “BT >”.
Front L/Front R/Center speaker
section
Speaker system
Full range speaker system, Bass reflex
Speaker
40 mm × 100 mm cone type × 3
Dimensions (w/h/d) (approx.)
900 mm × 52 mm × 70 mm
Mass (approx.)
2.1 kg
Speaker system
Full range speaker system, Bass reflex
Speaker
65 mm cone type
Dimensions (w/h/d) (approx.)
80 mm × 1,070 mm × 70 mm
(projecting parts not included)
Mass (approx.)
2.7 kg
Design and specifications are subject to
change without notice.
On BLUETOOTH
communication
Supported BLUETOOTH version
and profiles
Profile refers to a standard set of
functions for various BLUETOOTH
product features. See “BLUETOOTH
section” in “Specifications” (page 29) for
the BLUETOOTH version and profiles
supported by this system.
Bar Speaker (SS-RT4)
Surround Speakers
(SS-SRT4)

Sony HT-RT4 Specifications

General

Game mode	Yes
Audio decoders	Dolby Digital, Dolby Dual Mono
RMS rated power	- W
Audio output channels	5.1 channels
Subwoofer type	Active subwoofer
Cables included	Optical
Receiver included	-
Product color	Black
Audio formats supported	DTS, LPCM, PCM
Consumer Electronics Control (CEC)	BRAVIA Sync
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Power consumption (standby)	0.4 W
Power consumption (typical)	85 W

Weight and Dimensions

Depth	70 mm
Width	900 mm
Height	52 mm
Soundbar weight	2100 g
Subwoofer depth	315 mm
Subwoofer width	190 mm
Subwoofer height	392 mm
Subwoofer weight	7800 g