Sony HT-RT4 User Manual

19
GB
Settings and Adjustments
“AUD >”
(Audio)
“DUAL”
(Dual mono)
You can enjoy multiplex broadcast sound when the
system receives a Dolby Digital multiplex broadcast
signal.
“M/S”: Mixed sound of both the main and sub languages
will be output.
“MAIN”: Sound of the main language will be output.
“SUB”: Sound of the sub language will be output.
“TV AU”
(TV audio)
“AUTO”: Select this setting when the system is
connected to an HDMI (ARC) jack of a TV with an HDMI
cable.
“OPT”: Select this setting when the system is connected
to a TV with the optical digital cable.
“EFCT”
(Sound effect)
“ON”: The sound of the selected sound field is played. It
is recommended to use this setting.
“OFF”: The input source is down-mixed for 2 channels.
“STRM”
(Stream)
Shows the current audio stream information.
See page 29 on the supported audio formats.
“HDMI>” “CTRL”
(Control for HDMI)
“ON”: The Control for HDMI function is enabled. Devices
connected with an HDMI cable can control each other.
“OFF”: Off.
“TVSTB”
(Standby Linked to
TV)
This function is available when you set “CTRL” to “ON”.
“AUTO”: If the input of the system is “TV”, the system
turns off automatically when you turn off the TV.
“ON”: The system turns off automatically when you turn
off the TV regardless of the input.
“OFF”: The system does not turn off when you turn off
the TV.
“COLOR”
(HDMI color)
“AUTO”: Automatically detects the type of external
device, and switches to the matching color setting.
“YCBCR”: Outputs YCBCR video signals.
“RGB”: Outputs RGB video signals.
“BT >”
(BLUETOOTH)
“BTAAC”
(BLUETOOTH
Advanced audio
coding)
You can set whether or not the system uses AAC via
BLUETOOTH.
“ON”: Enable AAC codec.
“OFF”: Disable AAC codec.
If you change the “BTAAC” setting when a BLUETOOTH
device is connected, the codec setting is only reflected
after the next connection.
“BTSTB”
(BLUETOOTH
standby)
This function is available when the system has pairing
information. The system is in BLUETOOTH standby mode
even when it is turned off.
“ON”: BLUETOOTH standby mode is enabled.
“OFF”: BLUETOOTH standby mode is disabled.
“INFO”
(BLUETOOTH
device information)
The detected BLUETOOTH device name and address
appear in the front panel display.
“NO DEVICE” appears if the system is not connected to a
BLUETOOTH device.
Menu items Function
Note

Sony HT-RT4 Specifications

General

Game mode	Yes
Audio decoders	Dolby Digital, Dolby Dual Mono
RMS rated power	- W
Audio output channels	5.1 channels
Subwoofer type	Active subwoofer
Cables included	Optical
Receiver included	-
Product color	Black
Audio formats supported	DTS, LPCM, PCM
Consumer Electronics Control (CEC)	BRAVIA Sync
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Power consumption (standby)	0.4 W
Power consumption (typical)	85 W

Weight and Dimensions

Depth	70 mm
Width	900 mm
Height	52 mm
Soundbar weight	2100 g
Subwoofer depth	315 mm
Subwoofer width	190 mm
Subwoofer height	392 mm
Subwoofer weight	7800 g