24
GB
By updating your software to the latest
version, you can take advantage of the
newest functions.
During a software update, “UPDT”
appears in the front panel display. After
the update is complete, the system
automatically reboots.
While the updating operation is in
progress, do not turn on or off the
system or operate the system or TV. Wait
for the software update to complete.
• For information about update functions,
visit the following website:
www.sony.eu/support
• To perform the software update
automatically, set the [Auto Update] to [On]
(page 28). Depending on the content of the
software update, even though [Auto
Update] is set to [Off], updating may be
performed (page 28).
[Update via Internet]
Updates the system’s software using the
available network. Make sure network is
connected to the Internet.
[Update via USB Memory]
Updates software using USB memory.
Make sure that the software update folder
is correctly named “UPDATE.”
[TV Type]
[16:9]: Select this when connecting to a
wide-screen TV or a TV with a wide-mode
function.
[4:3]: Select this when connecting to a 4:3
screen TV without a wide-mode function.
[Output Video Resolution]
[Auto]: Outputs video signal according to
the resolution of the TV or connected
device.
[480i/576i]*, [480p/576p]*, [720p],
[1080i], [1080p]: Outputs video signal
according to the selected resolution
setting.
* If the color system of the playback content
is NTSC, the video signals resolution can
be converted to [480i] and [480p] only.
[24p Output]
[Network content 24p Output]
This function sets the signals output from
the HDMI OUT (ARC) jack on the system
when using the Screen mirroring function.
[Auto]: Outputs 24p video signals only
when you connect a 1080/24p-
compatible TV via an HDMI connection
and the [Output Video Resolution] is set
to [Auto] or [1080p].
[Off]
: Select this when your TV is not
compatible with 1080/24p video signals.
[4K Output]
[Auto1]: Outputs 2K (1920 × 1080) video
signals during video playback and 4K
video signals during photo playback
when connected to a 4K-compatible
device manufactured by Sony.
Outputs 4K video signals during playback
of 24p video content or playback of
photos when connected to a device other
than 4K-compatible device manufactured
by Sony.
This setting does not work for 3D video
image playback.
[Auto2]: Automatically outputs 4K/24p
video signals when you connect a 4K/
24p-compatible device and make the
appropriate settings for [Network content
24p Output] in [24p Output], and also
outputs 4K/24p photo images when you
play 2D photo files.
[Off]: Turns off the function.
[Software Update]
Notes
[Screen Settings]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
