Sony HT-RT5 User Manual

37
GB
Other Functions
Saving Power in Standby
Mode
Check that you have made the following
settings:
– [Bluetooth Standby] is set to [Off]
(page 26).
– [Standby Through] is set to [Off]
(page 27).
– [Quick Start/Network Standby] is set to
[Off] (page 28).
– [Remote Start] is set to [Off] (page 29).
Enabling the IR Repeater
Function (when you
cannot control the TV)
When the Bar Speaker obstructs the
remote control sensor of the TV, the TV
remote control may not work. In that
case, enable the IR repeater function of
the system.
You can control the TV with the remote
together with the supplied IR blaster.
• Be sure to check that the remote control of
the TV cannot control the TV, and then set
[IR-Repeater] to [On] (page 27). If it is set to
[On] when the remote control can control
the TV, appropriate operation may not be
obtained because of the interference
between the direct command from the
remote control and the command via the
system.
1 Connect the supplied IR blaster to
the IR BLASTER jack of the Bar
Speaker.
Note
IR blaster

Sony HT-RT5 Specifications

General

Output power	550 W
Apple docking compatibility	Not supported
HDMI in	3
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Near Field Communication (NFC)	Yes
Number of amplifier channels	5.1 channels
Audio decoders	DTS-HD HR, Dolby Pro Logic, DSD, Dolby Digital, DTS, DTS-ES, DTS 96/24, Dolby Digital Plus, DTS-HD
Package depth	257 mm
Package width	1158 mm
Package height	571 mm
Package weight	19000 g
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Product color	Black
Soundbar speaker RMS power	270 W

Weight and Dimensions

Depth	128 mm
Width	1080 mm
Height	56 mm
Soundbar weight	3800 g
Subwoofer depth	386 mm
Subwoofer width	191 mm
Subwoofer height	383 mm
Subwoofer weight	8500 g