Sony HT-S100F User Manual

13
GB
Mounting the Bar
Speaker on a Wall
You can mount the Bar Speaker on a
wall.
• Prepare screws (not supplied) that are
suitable for the wall material and
strength. As a plasterboard wall is
especially fragile, attach the screws
securely in the wall beam. Install the
speakers horizontally, hung by screws in
studs in a continuous flat section of the
wall.
• Have the installation done by a Sony
dealer or licensed contractor and pay
special attention to safety during the
installation.
• Sony shall not be held responsible for
accidents or damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
disaster, etc.
1 Prepare two screws (not supplied)
that are suitable for the wall
mount holes on the rear of the Bar
Speaker.
2 Stick WALL MOUNT TEMPLATE
(supplied) on a wall.
1 Align TV CENTER LINE () of
WALL MOUNT TEMPLATE with the
center line of your TV.
2 Align TV BOTTOM LINE () of
WALL MOUNT TEMPLATE with the
bottom of your TV, then stick
WALL MOUNT TEMPLATE on a
wall by using a commercially
available adhesive tape, etc.
Preparing for Using the System
Notes
Hole on the rear of the Bar Speaker
4mm
More than 30 mm
5 mm
10 mm
Center of the TV
WALL MOUNT
TEMPLATE
Adhesive tape,
etc.

Sony HT-S100F Specifications

General

Output power	120 W
Docking connector type	-
USB port	Yes
Bluetooth version	4.2
Connectivity technology	Wireless
Near Field Communication (NFC)	No
Audio decoders	Dolby Digital
RMS rated power	- W
Audio output channels	2.0 channels
Product color	Black
Audio formats supported	MP3, WAV, WMA
Power consumption (standby)	0.5 W
Power consumption (typical)	30 W
Cables included	AC

Weight and Dimensions

Depth	64 mm
Width	900 mm
Height	88 mm
Soundbar weight	2400 g