EN
Chapter 5: Sound Adjustment
21
Making a Personal
Audio Emphasis File
(personal file)
You can create a personal file of audio
patterns (surround effect and graphic
equalizer) and store them in the memory of
the unit. Later call up an audio pattern to
play a favorite tape, CD, or radio program.
Create up to five audio files.
Before operation, first select the audio
emphasis you want for your basic sound.
1Obtain the sound effect you want by
using the graphic equalizer and
surround effect.
2Press and hold down P FILE for more
than a second.
The personal file number appears in the
display.
3Use the JOG dial to select the file
number (P FILE) where you want to
store the sound effect.
4Press ENTER/NEXT.
The adjusted sound effects are stored
under the selected file number. The
settings previously stored at this
memory location are erased and
replaced by the new settings.
To call up the personal file
1 Press P FILE (or MUSIC MENU
/ on the remote) repeatedly
until personal file appears in the
display.
The last selected personal file appears in
the display.
2 Use the JOG dial (or press MUSIC
MENU / on the remote) to select
the personal file you desire.
3 Press ENTER/NEXT.
POWER
n
ON
2
3
4
12563 250 500 1k 2k 4k
DOLBY NR
OFF
CD
CLIP
1DISC
12345
678
VOLUME
File number
To Next Page
Loading...
Need help?
General
