EasyManuals Logo

Sony MHC-771 User Manual

Sony MHC-771
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
EN
For Your Information
29
Amplifier section
Continuous RMS power output
U.S. model: 50 W + 50 W
(6 ohms at 40 – 20,000Hz,
0.8 % THD)
Canadian model: 50 W +
50 W (8 ohms at 1 kHz, 5%
THD)
Inputs
100 CD/VIDEO IN (phono jacks):
voltage 450 mV,
impedance 47 kilohms
MIX MIC (phone jacks):
sensitivity 1 mV,
impedance 10 kilohms
Outputs
100 CD/VIDEO OUT (phono jacks):
voltage 250 mV
impedance 1 kilohms
PHONES (stereo phone jack):
accepts headphones of
8 ohms or more.
SPEAKER:
accepts impedance of
6 to 16 ohms.
SURROUND SPEAKER:
accepts impedance of
16 ohms.
SUPER WOOFER:
Voltage 1 V, impedance
1 kilo ohms.
Tape player section
Recording system
4-track 2-channel stereo
Frequency response
(DOLBY NR OFF)
40 – 13,000 Hz (±3 dB),
using Sony TYPE I cassette
40 – 14,000 Hz (±3 dB),
using Sony TYPE II cassette
Wow and flutter
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
Speaker
SS-H771
Speaker system 3-way speaker system
Speaker units
Woofer: 15 cm, cone type
Tweeter: 5 cm, cone type
Super Tweeter:
2 cm, dome type
Eucloser type Bass reflex
Rated impedance
6 ohms
Dimensions Approx. 205 × 325 ×
275 mm
(8
1
/
8
× 12
7
/
8
× 10
7
/
8
in)
(w/h/d)
Mass Approx. 4 kg (8 lb 13 oz)
net per speaker
Specifications
For the U.S. model
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, both
channels driven, from 40 –
20,000 Hz; rated 50 watts per
channel minimum RMS
power, with no more than
0.9 % total harmonic
distortion from 250
milliwatts to rated output.
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
Laser output Max. 44.6 µW*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Frequency response
2 Hz – 20 kHz (±0.5 dB)
Wavelength 780 – 790 nm
Signal-to-noise ratio
More than 90 dB
Dynamic range More than 90 dB
Tuner section
FM stereo, FM/AM superheterodyne
tuner
FM tuner section
Tuning range 87.5 – 108.0 MHz
(100 kHz step)
Antenna FM lead antenna
Antenna terminals
75 ohm unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range 531 – 1,710 kHz (with the
tuning interval set at 9 kHz)
530 – 1,710 kHz
(with the tuning interval set
at 10 kHz)
Antenna AM loop antenna,
External antenna terminals
Intermediate frequency
450 kHz
Supplied accessories
AM loop antenna (1)
Remote RM-SD50 (1)
Sony SUM-3 (NS) batteries (2)
FM lead antenna (1)
Speaker cords (2)
General
Power requirements
120 V AC, 60 Hz
Power consumption
U.S. model: 110 W
Canadian model: 150 W
Dimensions Approx. 280 x 325 x
360 mm
(11
1
/
8
x 12
7
/
8
x 14
1
/
4
in)
(w/h/d)
incl. projecting parts and
controls
Mass Approx. 8.2 kg
(18 lb 1 oz)
Optional accessory
Surround speaker SS-SR10P
Speaker system Full range
Speaker units 10 cm dia., cone type
Enclosure type Closed
Rated impedance
16 ohms
Dimensions Approx. 125 x 160 x 110 mm
(5 x
63
/8 x
43
/
8
in) (w/h/d/)
Mass Approx. 700 g (1 lb 8 oz) per
speaker
Design and specifications are subject to change
without notice.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony MHC-771 and is the answer not in the manual?

Sony MHC-771 Specifications

General IconGeneral
BrandSony
ModelMHC-771
CategoryStereo System
LanguageEnglish

Related product manuals