Sony MHC-NX3AV Operating Instructions (primary manual) User Manual

Basic Operations
19
1 Press § and insert a recorded tape
in deck A and a recordable tape in
deck B.
2 Press HI DUB.
Deck B stands by for recording.
3 Press DIRECTION repeatedly to
select A to record on one side.
Select ß (or RELAY) to record on
both sides.
4 Press REC PAUSE/START.
Dubbing starts.
To stop dubbing
Press π on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION to ß when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes on both decks reverse together.
• You don’t have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
• Dolby NR is off and DIRECTION (A or RELAY)
is ß when the mains AC power supply is
switched off.
Recording from a
tape
— High-speed Dubbing
With the side
you want to
play/record
facing forward
You can use TYPE I (normal) or TYPE II
(CrO2) tapes. The recording level is
automatically adjusted.
–
+
0
g
)
≠ +
–
+
1
2
3
4
5
§
§ §
·
ª · π ª · π
∏
π
DOLBY NR
π
π
1/u
(Power)
11324
§

Sony MHC-NX3AV Operating Instructions (primary manual) Specifications

General

Brand	Sony
Model	MHC-NX3AV Operating Instructions (primary manual)
Category	Stereo System
Language	English