Sony MHC-NX3AV Operating Instructions (primary manual) User Manual

25
1 Place a CD and insert a recordable
tape into deck B.
2 Press CD.
3 Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.
4 Press one of the DISC 1~5 buttons to
select a CD.
5 Turn the jog dial until the desired
track appears in the display.
6 Press ENTER.
The track is programmed. The last
programmed track number and the total
programmed track number appear,
followed by the total playing time.
7 To programme additional tracks to
be recorded on side A, repeat steps
4 to 6.
Skip step 4 to select tracks from the same
disc.
PROGRAM
3
PROGRAM
–
+
0
g
)
≠ +
–
+
1
2
3
4
5
§
§ §
·
ª · π ª · π
∏ π
DOLBY NR
EDIT
π
Recording a CD by
specifying track order
— Programme Edit
Track number
Disc number
The last programmed track
Total playing time
continued
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
1/u
(power)
1
2
3
4
56
12
10
118

Sony MHC-NX3AV Operating Instructions (primary manual) Specifications

General

Brand	Sony
Model	MHC-NX3AV Operating Instructions (primary manual)
Category	Stereo System
Language	English