MHC-V6D.GB.4-537-583-11(1)
18
GB
Changing the color
system
(Except for Latin American model)
Connect your TV to the system and
set the color system to PAL or NTSC
depending on the color system of
your TV.
The default setting for color system
is different depending on the area.
Each time you perform the
procedure below, the color system
changes as follows:
NTSC
PAL
1 Press to turn on the system.
2 Press DVD/CD.
3 Hold down PAN and LED COLOR
on the unit for more than 3
seconds.
“COLOR NTSC” or “COLOR PAL”
appears on the display.
Performing “QUICK”
setup
Before using the system, you
can make the minimum basic
adjustments in “QUICK” setup.
1 Turn on your TV and select the
video input.
2 Press to turn on the system.
3 Press DVD/CD or USB.
The guide message [Press ENTER to
run QUICK SETUP.] appears at the
bottom of the TV screen.
4 Press without loading a disc
or connecting a USB device.
[LANGUAGE SETUP] appears on the
TV screen. Displayed items may vary
depending on country or region.
5 Press / repeatedly to select a
language, then press .
The setting is selected and
[VIDEO SETUP
] appears on the TV
screen.
6 Press / repeatedly to select
the setting that matches your
TV type, then press .
After [QUICK SETUP is complete.]
appears on the TV screen, the
system is ready for playback.
To change the setting manually
See “Using the Setup Menu” (page
31).
To quit “QUICK” setup
Hold down SHIFT, then press SETUP.
Note
The guide message appears when you
turn on the system for the first time or
after performing [RESET] (see “Returning
the “SETUP” settings to the default” on
page63).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
