55
GB
MHC-V6D.GB.4-537-583-11(1)
Other Operations
Deactivating the
buttons on the unit
(Child Lock)
You can deactivate the buttons on
the unit (except ) to prevent
misoperation, such as child mischief.
Hold down on the unit for more
than 5 seconds.
“CHILD LOCK” and “ON” appear on the
display.
You can only operate the system using
the buttons on the remote control.
To turn off the Child Lock function, hold
down on the unit for more than 5
seconds until “CHILD LOCK” and “OFF”
appear on the display.
Note
Child Lock function will be turned off
automatically when you disconnect the
AC power cord.
Setting the automatic
standby function
This system is equipped with an
automatic standby function. With
this function, the system enters
standby mode automatically in
about 15 minutes when there is no
operation or audio signal output.
By default, the automatic standby
function is turned on.
1 Hold down SHIFT, then press
OPTIONS.
2 Press
/
repeatedly to select
“AUTO STBY,” then press .
3 Press
/
repeatedly to select
“ON” or “OFF.”
Notes
The message “AUTO STBY” flashes on
the display about 2 minutes before
entering standby mode.
The automatic standby function does
not work in the tuner function.
The system may not enter standby
mode automatically in the following
cases:
when an audio signal is detected.
during playback of audio files.
while the preset Play Timer,
Recording Timer or Sleep Timer is in
process.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
