39
GB
MHC-V6D.GB.4-537-583-11(1)
Tuner
Notes on transferring
While transferring (except analog
transfer), no sound is output.
CD-TEXT information is not transferred
to the created MP3 files.
The transfer stops automatically if:
the USB device runs out of space
during transfer.
the number of audio files or folders
on the USB device reaches the limit
that the system can recognize.
If a folder or file that you are trying
to transfer already exists on the
USB device with the same name, a
sequential number is added after the
name without overwriting the original
folder or file.
You cannot perform the following
operations during transfer:
Eject the disc.
Select another track or file.
Pause playback or find a point in the
track or file.
Change the function or tuner band.
When transferring music to a Walkman®
using “Media Manager for WALKMAN,”
be sure to transfer in MP3 format.
When connecting a Walkman® to
the system, be sure to connect after
the display “Creating Library” or
“Creating Database” on the Walkman®
has disappeared.
Tuner
Listening to the radio
1
Press FUNCTION repeatedly to
select the tuner function
(“TUNER FM” or “TUNER AM”).
2 For automatic scanning:
Hold down TUNING+/– until the
frequency begins to change on the
display.
Scanning stops automatically and
“TUNED” lights up on the display
when a station is found.
If “TUNED” does not light up and
scanning does not stop, press to
stop scanning. Then, perform
manual tuning (below).
For manual tuning:
Press TUNING+/– repeatedly to tune
to the station you want.
Note
When you tune to an FM station that
provides RDS services, information such
as the service name or station name is
provided by broadcasts. You can check
the RDS information by pressing DISPLAY
repeatedly.
Hint
To reduce static noise on a weak FM
stereo station, hold down SHIFT, then
press FM MODE repeatedly until “MONO”
lights up on the display. You will lose the
stereo effect, but reception will improve.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
