Sony PDW-F1600 User Manual

99
Transferring Clips (Direct FTP Function)
Chapter 5 Operations in GUI Screens
Transferring Clips (Direct FTP Function)
You can transfer clips (MXF files) between this unit and
external devices over a network. This unit has an Direct
FTP function, which allows you to connect to any
XDCAM device or computer with an FTP server function
and transfer files with a few simple operations in the GUI
screen.
The following table lists the types of file transfers that this
unit can execute.
File transfers with this function are limited to clips (high-
resolution data) and clip list files. To transfer files of other
types (proxy AV data, files in the General and User Data
directories, and so on), operate after establishing a FAM or
FTP connection (see page 106).
Preparations for clip transfers
Check the following points.
• This unit must be connected over a network to the
transfer target device (XDCAM device or computer).
• The transfer target device (XDCAM device or
computer) must be supplied with stable power, and the
power must not be turned off during the transfer. For
battery powered devices, the batteries must have
sufficient remaining capacity.
• The settings under maintenance menu item M5:
NETWORK must be set to values that allow network
connections.
• The remote control switch must be set to NET.
• For XDCAM devices that support UPnP (universal plug
and play), the UPnP function must be enabled (the
setting may vary).
Transfer direction Transfer target Function
Upload One or more clips put
Multiple clips with clip list
Part of one clip partial put
Download One clip get
Note
Transfer direction Transfer target Function
Upload clip (put)
Download clip (get)
a) The following software requirements must be satisfied.
• An FTP server function must be available.
• In the case of Windows, Microsoft Window IIS (Internet Information
Service) Version 7.0 or higher.
• In the case of Macintosh, Mac OS X Version 10.5.6 or higher.
Network
Local host (this unit)
PDW-HD1500
Laptop computer
a)
Material server
Remote host

Sony PDW-F1600 Specifications

General

Display	LCD
Internal	No
Product color	Black
USB connectivity	Yes
Video compression formats	MPEG, MPEG4
DC voltage	12 V
AC input voltage	100 - 240 V
Power consumption (typical)	80 W
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	25 - 90 %
BNC input ports	6
BNC output ports	9
USB 2.0 ports quantity	2
VGA (D-Sub) output ports	1
Ethernet interface type	Gigabit Ethernet

Weight and Dimensions

Depth	396 mm
Width	210 mm
Height	132 mm
Weight	6500 g