56
Changing the program
already set or changing
another program that you
select
1 Follow Steps 1 - 4 on page
51- 52.
2 Select “COPY” by pressing
the Label Select button.
If you want to change the
program already set, go to Step
5 without pressing the COPY
key.
The program numbers appear.
Numbers which have the timer
setting information flashes. The
others stay lit.
3 Press the SCROLL button
repeatedly until the
program number (PROG 1-
12) of which the contents
you want to change
appears.
PROG4
ON/OFF
TEST
SETUP
COPY
SET
Setting the Timer (continued)
To change the name of the
Timer Macro labels on the
display
You can change the display of the labels
on the display to the most suitable
name using up to 8 characters or digits.
1 In Step 4 (page 52), select the Timer
Macro label of which name you
want to change (for example,
PROG4) by keeping the Label Select
button pressed for more than 2
seconds.
The Commander enters the Label
Input mode.
2 Input the name of the label.
Follow Steps 3 - 5, on page 27 - 28.
3 Press the SET button.
The display goes to Step 5 on page
52.
SET
TIMER
PROG4
To Next Page
Loading...
Need help?
General
