Sony SA-32SE1 User Manual

13
GB
Listening to TV sound from the speaker of the unit
Listening to TV sound from the speaker of the unit
1
Turn on the unit or make sure
the unit is in standby mode.
2 Turn on the TV.
While the unit is in the standby mode, the
unit turns on automatically when a sound
of a TV is detected.
3 Adjust the volume of the unit.
Note
When the sound output level of your TV cannot be
changed, adjust the volume of the unit.
If the sound output jack of the TV can be set to
“Variable”, the volume of the unit can be
changed by adjusting the TV volume.
For TV settings, refer to the operating
instructions of the TV.
1 Set the sound output jack of the
TV to “Variable”.
2 Adjust the volume of the unit
according to the TV.
The above settings 1 and 2 allow
you to control the volume of the
unit by adjusting the TV volume.
Note
If sufficient volume level cannot be obtained from
the unit when the sound output jack of the TV is set
to “Variable”, set the sound output jack of the TV to
“Fixed” and adjust the volume of the unit.
Listening to TV sound Control the volume of the unit
by adjusting the TV volume

Sony SA-32SE1 Specifications

General

Tweeter	Yes
Speaker type	3-way
Speaker position	Front
Tweeter diameter	65 mm
Number of drivers	4
Speaker placement	Wall-mountable
Audio output channels	2.0 channels
Number of tweeter drivers	2
Product color	Black
Volume control	Digital
Recommended usage	-
Impedance	8 Ω
Frequency range	20 - 20000 Hz
RMS rated power	40 W
Total Harmonic Distortion (THD)	10 %
Number of products included	1 pc(s)
Connectivity technology	Wired
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Package depth	125 mm
Package width	815 mm
Package height	156 mm
Package weight	3000 g

Weight and Dimensions

Depth	76.7 mm
Width	754 mm
Height	80 mm
Weight	1900 g