EasyManuals Logo
Home>Sony>Speaker System>SA-32SE1

Sony SA-32SE1 User Manual

Sony SA-32SE1
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
GB
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
To reduce the risk of fire, do not cover the
ventilation opening of the apparatus with
newspapers, tablecloths, curtains, etc. Do not place
the naked flame sources such as lighted candles on
the apparatus.
To reduce the risk of fire or electric shock, do not
expose this apparatus to dripping or splashing, and
do not place objects filled with liquids, such as
vases, on the apparatus.
Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, fire or
the like.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
As the main plug of AC adaptor is used to
disconnect the unit from the mains, connect it to an
easily accessible AC outlet. Should you notice an
abnormality in it, disconnect it from the AC outlet
immediately.
The unit is not disconnected from the mains as long
as it is connected to the AC outlet, even if the unit
itself has been turned off.
To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions.
Do not use the AC power cord with other products.
The mains switch is located on the rear exterior.
The nameplate is located on the bottom exterior.
The serial number is located on the bottom exterior.
For customers in the United
States, Canada, and Taiwan
The date of manufacturer marking is located on the
bottom exterior.
For customers in the United
States and Canada
ENERGY STAR
®
is a U.S. registered
mark.
As an ENERGY STAR
®
partner,
Sony Corporation has determined that
this product meets the ENERGY
STAR
®
guidelines for energy
efficiency.
For customers in the United
States
Owner’s Record
The model and serial numbers are located on the
bottom of the unit. Record these numbers in the
space provided below. Refer to them whenever you
call upon your Sony dealer regarding this product.
Model No.
Serial No.
These following indications are located on the
bottom exterior of the AC Adaptor.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
WARNING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony SA-32SE1 and is the answer not in the manual?

Sony SA-32SE1 Specifications

General IconGeneral
TweeterYes
Speaker type3-way
Speaker positionFront
Tweeter diameter65 mm
Number of drivers4
Speaker placementWall-mountable
Audio output channels2.0 channels
Number of tweeter drivers2
Product colorBlack
Volume controlDigital
Recommended usage-
Impedance8 Ω
Frequency range20 - 20000 Hz
RMS rated power40 W
Total Harmonic Distortion (THD)10 %
Number of products included1 pc(s)
Connectivity technologyWired
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Package depth125 mm
Package width815 mm
Package height156 mm
Package weight3000 g
Weight and Dimensions IconWeight and Dimensions
Depth76.7 mm
Width754 mm
Height80 mm
Weight1900 g

Related product manuals